74
S
c
a
n
n
in
g
F
u
n
c
tio
n
VFO Scan
4
Touch
.
5
Touch
[M.DEL]
.
[DELETE OK?] appears on the LCD.
6
Select
[OK]
, then touch
[OK]
to confirm.
T OP
!A 1
The frequency is removed from the skip search memory channel.
Tip
To remove other frequencies from the skip search memory channels, repeat steps 2 to 6.
Tip
• Restoring the deleted Frequency to the Skip Search Memory Channel
If you have not registered a new frequency to the same memory channel, you can restore the deleted
frequency by repeating steps 1 through 4, then touching
[M.REX]
.
Setting the Receive Operation When Scanning Stops
When scanning stops, one of the following three receiving options may be chosen:
(1) The signal is received for a specified period of time, and then scanning resumes. The
scan resume time may be set from 2 to 10 seconds at 0.5 second intervals.
(2) The signal is received and [BUSY] appears on the LCD until the signal fades out. Two
seconds after the signal fades out, scanning resumes.
(3) Scanning stops and the current frequency is received. [HOLD] appears on the LCD.
1
Press and hold the
key for over one second.
The transceiver enters Set mode.
