25
P
re
p
a
ra
tio
n
Preparing the Battery Pack/External Power Supply
Remark
Approximate hours are estimated assuming that the transceiver is operated under the
following conditions. The operation time that this transceiver can be actually used varies
depending on use conditions, ambient temperature, etc.
• When the transceiver is repeatedly operated by high-power transmission for 6 seconds
band selected.
How to Use the Battery Case (FBA-39)
Tip
1
Open the cover.
hand pointer in the illustration.
2
Place the alkaline batteries in the battery case.
Caution
of the alkaline batteries.
3
Close the cover.
Push the four corners of the cover firmly to close it tightly.
Tip
When the battery charge is low,
batteries are almost exhausted,
Cautions
case. Rechargeable AA batteries cannot be used, either.
Do not mix new and old batteries. The service life of new batteries may
decrease.
If you do not use the transceiver for a long period, remove the batteries
from the battery case.
If the terminal or electrode of the battery case is dirty, the transceiver can
malfunction due to poor contact, resulting in overheating or explosion.
If the terminal or electrode gets dirty, clean it using a dry cloth or cotton
swab.
