109
C
o
m
m
u
n
ic
a
tin
g
w
ith
a
S
p
e
c
ifi
c
R
e
m
o
te
S
ta
tio
n
Communicating with a Specific Remote Station
Using the Tone Squelch Function
The tone squelch opens the speaker audio only when a signal containing the specified
CTCSS tone is received. Using the digital code squelch (DCS) opens the speaker audio
only when a signal containing the specified DCS code is received. When the tone squelch
function is active, signals from other stations not containing the specified code are not
heard. The receiver will be quiet while waiting for a call from a specific station over a long
period of time.
Cautions
The tone squelch function does not function in digital mode. Touch
[MODE]
to switch the
communication mode to AMS (Automatic Mode Select Function) or analog mode in advance.
The tone squelch function does not function when the APRS baud rate is set on B-band. In Set mode,
select
[APRS]
[4 APRS MODEM]
, then switch the setting to OFF in advance.
Selecting the Squelch Type
1
Press and hold the
key for over one second.
The transceiver enters Set mode.
2
Touch
[SIGNALING]
.
3
Touch
[11 SQL TYPE]
.
4
Rotate the DIAL to select the desired squelch type.
5
Press .
The selected squelch type is set and the transceiver exits from Set mode.
