117
C
o
m
m
u
n
ic
a
tin
g
w
ith
a
S
p
e
c
ifi
c
R
e
m
o
te
S
ta
tio
n
Calling Only a Specific Station New Pager Function
3
Touch
[6 PAGER]
.
4
Rotate the DIAL to select
[CODE-RX]
, then press the
key.
5
Rotate the DIAL to select the first element of the code from 1 to 50, then press the
key.
The cursor moves.
6
Rotate the DIAL to select the second element of the code from 1 to 50, then press the
key.
Caution
The same code cannot be use for both elements.
7
Press .
Your station code is set and the transceiver exits from Set mode.
Tips
• The default setting: [05 47]
• Even if the first and second parts of your personal code are reversed, i.e., [47 05] from [05 47]
they are still recognized as the same code.
• If the same code is specified for all individuals, all the individuals can be called at the same
time.
Activating the New Pager Function
1
Press and hold the
key for over one second.
The transceiver enters Set mode.
2
Touch
[SIGNALING]
.
3
Rotate the DIAL, then touch
[11 SQL TYPE]
.
4
Rotate the DIAL to select [PAGER].
5
Press .
The new pager function is activated and the transceiver exits from Set mode.
You are ready to make a call, or wait for a call from a remote station, using the new
pager function.
Calling a Specific Station
1
See “Activating the New Pager Function” on page 117to activate the new pager
function.
2
Press and hold the
key for over one second.
The transceiver enters Set mode.
