Yaesu FT DX 9000MP CONTEST - DATA MANAGEMENT OPERATION, Руководство по эксплуатации, Страница: 8 / 180

Page 6 FT
DX
9000MP O
PERATION
M
ANUAL
5. Adjusting the Main Dial Torque
The torque (drag) of the Main Tuning Dial may be adjusted according to your preferences. Simply hold down the rear skirt
of the knob, and while holding it in place rotate the Main Dial itself to the right to reduce the drag, or to the left to increase
the drag.
6. Restarting Power after a Voltage Fluctuation
If your AC mains power should suffer a significant fluctuation or interruption, we recommend that
you go through a complete power-up cycle, in order to ensure that all circuits are properly initialized.
To do this, be sure the front panel Power switch is turned off, then set the
FPS-9000H ’s Power switch
to the “
O
” position. Now unplug the AC cable from the rear panel of the
FPS-9000H
, and wait ten
seconds. Plug the AC cable back in, set the FPS-9000H ’s Power switch to “ I ,” and now press and
hold in the front-panel Power switch for two seconds to turn the transceiver on. After about 50 sec-
onds, all circuits wil be initialized, and normal operation may resume.
T
IGHTEN
T
OOSEN
H
OLD THE
S
KIRT
BBBBB
EFORE EFORE
EFORE EFORE EFORE
Y Y Y Y Y
OU OU
OU OU OU
B B B B B
EGIN EGIN
EGIN EGIN EGIN
. . . . . .
. . . . . .
. . .