Yaesu FT DX 9000MP CONTEST - DATA MANAGEMENT OPERATION, Руководство по эксплуатации

Страница: 134 / 180

Page 132 FT
DX
9000MP O
PERATION
M
ANUAL
M
EMORY
T
UNE
O
PERATION
You may freely tune off of any memory channel in a “Memory tune” mode that is similar to VFO operation. So long as you
do not over-write the contents of the current memory, Memory tune operation will not alter the contents of the memory
channel.
1. Press the [
V/M ] switch to recall any memory channel.
2. Rotate the [ MAIN Tuning Dial
] knob; you will now
observe that the memory channel’s frequency is chang-
ing.
“ ” will replace “ ” in the multi-panel win-
dow, indicating you are in the “Memory Tune”
mode.
During Memory Tune operation, you may change
operating modes, and engage and offset the Clari-
fier, if desired.
Press the [
V/M
] switch momentarily to return to
the originally-memorized frequency of the current
memory channel. One more press of the [
V/M
] key
will return you to VFO operation.
N N
N N N
O O O O OTE TE TE TE TE
Computer software programs utilizing the CAT sys-
tem interface port may presume that the transceiver
is operating in the VFO mode for certain features
like “band mapping” and/or frequency logging. Be-
cause the “Memory Tune” mode so closely re-
sembles the VFO mode, be sure that you have the
FT
DX
9000MP operating in a control mode com-
patible with your software’s requirements. Use the
VFO mode if you’re not sure.
[Main Tuning Dial] Knob
VDD TEMP SWR BIAS
[V/M] Switch
MMMMM
EMOR EMOR
EMOR EMOR EMORYYYYY
O O O O O
PERA PERA
PERA PERA PERATION
TION
TION TION TION