Programming DTMF Paging Code Memories
Before using DTMF Paging, you will need to store
your ID code in Code Memory P to receive private
calls (you may have already done this, as this slot is
also used for DTMF code squelch operation see
page 35). Afterwards, you can store up to six other
codes of your friends’ for group calls.
Follow this procedure to store code memories:
Press
to recall the code memory list. Turn
the knob to select code memory then use the
keypad to enter a three-digit code.
If you know other paging codes of other friends or
groups, you can enter them now turn the knob to
select code memories 1 6 and repeat the code
digit entry process.
Press the
to save the code entries and exit.
Select Code Memories for Operation
In the previous step, you entered your private paging
ID in code memory P, along with other group codes
in memories l-6. By default, code memories l-6 and
P are automatically enabled for operation as soon as
they are stored with a code, and Code memory P
cannot be turned off. Likewise, code memory C is
read-only. Code memories 1-6, however, can be en-
abled/disabled individually, should you not want to be
bothered receiving calls for particular groups:
Press
and rotate the knob to select a
code memory that you want to temporarily disable.
Now, press
as necessary to enable/disable the
selected code memory (the under bar disappears
for disabled code memories).
Turn the kn ob to select other code memories, and
repeat the process as needed to enable/disable
others (except C and P) as needed.
Содержание FT-50
Страница 1: ...FT 5OR Dual Band Amateur I I Hand Held Transceiver with Digital Voice Recorder Option...
Страница 50: ......
