Yaesu FT-50, Инструкция по эксплуатации

Страница: 34 / 61

Memory-Only Mode
This allows operation only on stored memories,
which are displayed by name (if any) at the left, and
the memory channel number to the right. No fre-
quency is displayed, and only hyphens appear if you
haven’t assigned a name to a memory.
Repeater shift and tone setting indicators are dis-
played, although they cannot be changed. In fact, the
alternate functions of most keys are disabled, as well
as the functions accessed by holding the knob down.
Only these functions are available, as indicated:
l
Hi/Low TX Power:
l
Channel Selection: knob or keypad
l
Scanning:
l
Reverse Repeater Split:
l
Dual Watch:
l
Digital Voice (with optional FTT-12)
After programming memories, you can toggle mem-
ory-only operation on and off by turning the radio off,
then holding the
and LAMP buttons (top and
bottom buttons on the left side) while holding the
PWR button for second to turn it on again.
the Controls
The keypad buttons, knob and can each be
“locked” (disabled), to prevent inadvertent transmis-
sions or adjustments. By default, only the keypad
locks. To activate or deactivate the lock, press
To change the locking scheme to lock the
knob or
Hold the knob for second, then turn it to display
. Press the knob momentarily, and turn
it to select the items to lock :
keypad, (knob), = button,
or their combinations:
or
Press the PTT to return to the operating display..
Transmit Time-Out Timer
To limit accidental transmissions, such as if the radio
slips between the car seat with the
squeezed,
the time-out timer shuts off the transmitter after con-
tinuous transmission of 2.5 minutes. To change the
time-out duration:
Press the knob down for second, then turn it to
display
Press the knob momentarily, then turn it to select I,
minutes (or to disable the timer).
Press the PTT to save and exit.