23
Operation
Handheld Logging
→
Logging
The handheld can add a user-defined Site and/or Data ID to a data record if these
functions are enabled under the Logging menu. A check mark in the box next to
these features indicates they are enabled.
After selecting
Site
[ ] or
Data ID
[ ], the Site List or Data ID List will be shown.
New entries can be created by choosing
Add new...
The maximum number of
sites that can be stored on the handheld is 99.
If the handheld has a GPS signal, the current GPS coordinates will be auto-
populated when creating a new site. If the handheld does not have a built-in GPS,
the coordinates and altitude can be entered manually.
Sites can be listed in order of Name (
i.e.
alphanumeric order) or Distance from the
current position.
Choose an entry from the Site List or Data ID List to
Select
,
Edit
, or
Delete
. When
selected, data recorded will be tagged with the specific site and/or data ID.
NOTE:
The Manage Sites menu in Kor Software can be used to send a
picture of the Site to the instrument.
Continuous Mode
( Interval logging): Select the Continuous Mode check
box and enter the user-defined Log Interval (in hours:minutes:seconds) to log
samples continuously at the specified time interval. The Run screen will display
Start Logging...
when in Continuous Mode. Press
ENTER
to begin logging.
One sample logging:
Clear the Continuous Mode check box. The
Run screen will display
Log One Sample
. A sample will be logged each time the
ENTER
key is pushed when in the Run screen.
NOTE:
An option to change Site and/or Data ID (if enabled) appears once
ENTER
is pressed to begin logging.