XtremeAIR XA41, Руководство по обслуживанию

Страница: 137 / 284

Maintenance Manual XA41/XA42
AMM-XA42-0040-001 C.00
Page date: Page 5
25.09.2018 Chapter 28
To remove the flop tube:
1
Drain the main tank, refer to chapter 12-10-03.
2 Remove the cowling, refer to chapters 71-10-01 and 71-10-02.
3 Remove the lower access panel from the fire wall, refer to chapter 71-30-00.
4 Remove the fuel line from the outlet of the main tank.
5 Remove the five bolts from the outlet flange. Refer to Figure 28-4.
6 Remove the outlet flange together with the flop tube.
Be careful with flammable cleaning agents, such as acetone. Make sure that there is a good
airflow in the work area and that safety equipment is available. If you do not obey these
precautions, accidents can occur.
7 Before you assemble the flop tube again, examine the seal for damage. Replace the
seal, if necessary. Clean the sealing surfaces mechanically with acetone.
9 Examine the flop tube for wear and damage. Replace the flop tube assembly, if
necessary.
10 Assemble the flop tube in the opposite sequence. Apply “Epple 33” sealant to the
outlet flange. Safety the bolts to each other with safety wire.
11 Do a fuel leak check.
No. Quantity Component P/N
1 5 Bolt AN3H-3A
2 5 Washer AN960-10
3 1 Flop tube assembly XA42-2810-160
4 1 Seal tank XA42-2810-226
Figure 28-4: Flop tube assembly installation
WARNING