background image

R

R/

/C

C  E

EP

P  F

Flly

yiin

ng

g  W

Wiin

ng

g

Warranty

:This kit is guaranteed to be free from defects in material and workmanship at the date of

purchase.    It does not cover any damage caused by use or modification.  The warranty does not extend

beyond the product itself and is limited only to the original cost of the kit.  By the act of building this user-

assembled kit, the user accepts all resulting liability for damage caused by the final product.  If the buyer

is not prepared to accept this liability, it can be returned new and unused to the place of purchase for a

refund.

Notice:  Adult Supervision Required

:This is not a toy.  Assembly and flying of this

product requires adult supervision.  Read through this book completely and become familiar with the

assembly and flight of this airplane.  Inspect all parts for completeness and damage.  Contact Thunder

Tiger authorized agent if you find any problem or need tech support.

No.4319   Velocity EP

Wing Span: 32"(813mm)   

Length: 23.5"(596mm)   

Wing Area: 263.5 sq.in. (17dm

2

)   

Weight: 19.8oz. (560g)    

Motor: 400 Included   

Prop: 5 x 5 Included   

Radio: 3 CH w/ Elevon Req’d    

Servo: 2 Micro Servos Req’d

Содержание Velocity EP









Отзывы: