XtremeAIR XA41, Руководство по обслуживанию

Страница: 158 / 284

Maintenance Manual XA41/XA42
AMM-XA42-0040-001 C.00
Page 12 Page date:
Chapter 32 25.09.2018
WARNING
CAUTION
CAUTION
CAUTION
Grove 5.00-5 wheels with 5.00-5 6ply tires
Inspection:
1 Make sure that the wheel tie bolts are tight.
2 Visually examine the wheel for corrosion, cracks, or other damage.
3 Visually examine the brake disc for cracks, corrosion, grooves, unusual wear, or
other damage.
To disassemble the main wheel assembly from the landing gear strut:
1 Remove the main landing gear strut, refer to chapter 32-10-00.
2 Remove the axle split pin and the axle nut from the external side of the wheel axle.
3 Remove the main wheel.
To disassemble the wheel:
Do not disassemble the wheel halves before all the tire pressure is fully released. If
you do not obey this instruction, there is a risk of injury.
Be careful when you remove the wheel. Scratches and/or nicks will cause damage to
the corrosion-resistant protection of the wheel.
1
To deflate the tire, push the valve stem plunger until all the air is fully released.
2 Put the wheel assembly on an applicable work surface.
Be careful when you remove the tire beads from the wheel halves. Do not put the
tool between the tire and wheel flange. This can cause damage to the tire and/or
the wheel.
3 Disconnect the tire beads from the wheel halves with a tire bead breaker or other
applicable tools.
4 Remove the nuts, washers and bolts that hold the wheel halves together.
5 Remove the brake disc from the inner wheel half.
Be careful when you remove the wheel half. Do not cause damage to the inner tube, the
valve stem and the bearings.
6 Remove each wheel half from the tire.