XtremeAIR XA41, Руководство по обслуживанию

Страница: 100 / 284

Maintenance Manual XA41/XA42
AMM-XA42-0040-001 C.00
Page 4 Page date:
Chapter 25 25.09.2018
CAUTION
No. Quantity Component P/N
1 1 Front seat rib spacer bar XA42-2530-151
2 5 Screw AN5-6A
3 7 Washer AN960-516L
4 5 Nut MS21044N5
5 8 Screw AN4-10A
6 24 Washer AN960-416
7 8 Nut MS21044N4
8 4 Nut MS21083N4
9 12 Washer AN960-416L
10 4 Screw AN4-12A
Each lap belt is attached to a mount on the floor of the fuselage. The shoulder belts are
attached to the top part of the applicable seat frame. The crotch strap is attached to the
front seat rib spacer bar. The direction of installation of bolts is from the top to the bottom
and from the internal side to the external side.
25-10-03 Document Bag
The document bag is in the left access panel of the pilot seat. It is a leather bag with a
zipper to hold the documents safely during all flight attitudes.
The documents bag is for storage of:
• The Log book
• The Aircraft Flight Manual
• The Maps.
25-50-00 CARGO COMPARTMENTS
The XA41 and the XA42 have a cargo compartment which you can use during non-aerobatic
flight.
The cargo compartment must be empty for aerobatic flight.
If there are items in the cargo compartment during a utility flight, make sure that they
cannot move. Safety the items with the restraint system/restraint net.
Make sure that the weight of all items in the cargo compartment is not more than the
maximum of 10 (kg).
If you do not obey these precautions, accidents can occur.
To remove the cargo compartment:
1. Remove the screws along the center line of the cargo compartment (AN526C-8R8).
Hold the side of the cargo compartment which is being removed. This will prevent the part
from falling and prevent damage to the elevator pushrod.
2. Remove the screws along the external side (MS24693C273 and A3235-020-24A or
A3235-028-193)
3. First remove one part of the cargo compartment and then the other part.
4. Install the cargo compartment in the opposite sequence.
WARNING