Xtreme Power Conversion Corporation
G90 User’s Manual
Page 31
Uninterruptible Power Supply
3 - Output voltage setting
1.
Enter the setting interface. Press
and hold the function setting but-
ton
for more than 2 seconds
stepping through using the scroll
button
until reaching the
“OPU” flashing.
2.
Enter the BPS setting interface.
Press and hold the function setting
button
for more than ½ sec-
ond (less than 2 seconds). At this
time the “OPU” will stop flashing.
Briefly press the scroll button
or
for more than ½ second
(less than 2 seconds) to select
the output voltage as 208V, 220V
(default), 230V, 240V, then briefly
press the function setting button
for more than ½ second (less
than 2 seconds) to confirm selec-
tion.
3.
Press the function setting button
for more than 2 seconds to
exit setting menu.
4 - Battery string number and
type setting
1.
Enter the setting interface. Press
and hold the function setting but-
ton
for more than 2 seconds
stepping through using the scroll
button
until reaching the
“bAt” flashing.
2.
Enter the setting interface. Press
and hold the function setting but-
ton
for more than 2 seconds
stepping through using the scroll
button
until reaching the
“bAt” flashing. Press and hold the
scroll button
to select the
numerical value in accordance with
connected battery strings.
3.
Confirm the battery string settings
by press and hold the function set-
ting button
for more than ½
second (less than 2 seconds). Now
the battery strings setting is con-
firmed and the battery type value
below will flash
4. Set the battery type in the same
way.
5.
Press the function setting button
for more than 2 seconds to
exit setting menu.