© XPAND, All Rights Reserved.
6
www.xpandvision.com
Connector Panel
Figure 2: Connector Panel
(1) Motion Control - Typically used for controlling a motorized mount, if the Trinity Polarizer is attached to one. See section
Motion Control
Output
for more information.
(2) GPIO - Connector for connecting the unit to the projector. With use of special cables this connector can also be used for connecting the
projector’s or the digital cinema server’s GPIO ports to the unit.
(3) SYNC / 3D MODE LED - Amber LED for indicating which mode the unit is currently operating in.
A
B
C
D
E
F
G
H
I
J
1
2
3
4
5
6
System Parts
Important parts of the XPAND Trinity 3D Superlight Polarizer are shown in below image. This image is often referred to by this user manual
so it is suggested you study it carefully before proceeding to installation of the unit.
Figure 1: System Parts
(A) - Output windows / Active area
(B) - Mounting plate
(C) - Tilt adjustment screws
(D) - Input window
(E) - Connector panel
(F) - Top half image vertical frame adjustment screw
(G) - Top half image horizontal frame adjustment screw
(H) - Central image scale adjustment
(I) - Bottom half image vertical frame adjustment screw
(J) - Bottom half image horizontal frame adjustment screw
