www.xpand.me
5 www.xpandvision.com
General Warnings
»
Before use, make sure the XPAND Trinity 3D Superlight Polarizer is installed safely and securely (refer to the
Setup and
Configuration
section of this user manual). You should begin using the product only after proper installation.
»
Do not get the product wet by any means as this may cause fire, electric shock or malfunctioning.
»
When cleaning, do not use flammable sprays or flammable solutions directly or indirectly on the product.
»
Do not disassemble, repair, or modify the product yourself.
»
To reduce the risk of electric shock or fire do not open the product or remove any part.
»
Prior to cleaning XPAND Trinity 3D Superlight Polarizer always disconnect the power supply.
»
If using a motorized mount together with the product, only install it on mounts which can handle the weight of the product. Use
of XPAND’s Motorized Mount MK3 is strongly recommended.
Information
This manual can be revised without any prior notice. In addition, the design and specifications are subject to change without notice. Keep
track of XPAND’s website for possible changes.
This manual is to provide information and instructions for proper use of the product. Do not copy, bind or distribute.
Please check to see if this product is working properly upon receipt.
System Overview
The XPAND Trinity 3D Superlight Polarizer allows 3D Ready DCI projectors to project stereoscopic video on silver screens in combination
with circular polarized passive 3D glasses. This product delivers one of the best light efficiency levels in the comparable products class.
If you want to use your projector as a regular 2D projector, you can move the XPAND Trinity 3D Superlight Polarizer out of the way of the
projector lens allowing for a 2D projection at the projector’s original brightness.
Main features of the XPAND Trinity 3D Superlight Polarizer are:
»
High brightness and contrast ratio.
»
Control via string macros sent by a digital cinema server or projector.
»
Configurable operation using a dedicated PC-based configuration utility.
»
Service upgradable firmware.
What’s Included
»
(1) XPAND Trinity 3D Superlight Polarizer
»
(2) GPIO cables for connecting the unit to the projector
»
(1) Ethernet Crossover Cable
»
(1) Power Supply Adapter.
»
(1) User Manual
WARNING:
The supplied Ethernet Crossover Cable should not be used as a regular network cable. It is intended primarily for direct connec-
tion of the Trinity Polarizer to a PC when performing network settings configuration if needed.
