71
Use Email server:
Click the Use Email server checkbox and provide the following information
for Email server.
Email server:
Enter the host names or IP addresses for your mail servers in the fields provided.
NOTE
If a host name is used, a valid DNS server must be specified in the Network-Basic settings.
Port:
Enter the SMTP server port number for the SMTP Server. The Port number can be adjusted
in the range 1-65535. The default setting is 25.
NOTES
- If your mail server requires authentication, click the Use (SMTP) authentication checkbox for use
authentication to log in to this server.
- Please consult with your network administrator, if you want to change the port number.
Use (SMTP) authentication:
If your mail server requires authentication, click the Use
(SMTP) authentication checkbox for use authentication to log in to this server.
User name:
Enter the User name as provided by your network administrator.
Password:
Enter the Password as provided by your network administrator.
Login method:
Select one for SMTP authentication method allowed.
NOTES
- If a PLAIN or LOGIN mechanism is negotiated, the camera sends user name and password to the
SMTP server.
- The LOGIN mechanism is supported by Microsoft, as well as by some other clients. Most other
clients support the PLAIN authentication mechanism.
- Since the vast majority of Email clients support
only
PLAIN or LOGIN, mail server administrators
will probably want to consider using STARTTLS to provide an encryption "tunnel" between the client
and server, to protect the user name and password.
SMTP (Email) Receiver:
Click the each Receiver box which you wish to send Email and
enter Email address.
Receiver:
Enter the recipient’s email address as the receivers.
NOTE
The Sender email address will be used as the sender for all receivers sent by this camera and the
Receivers listed here will be received same email by this camera. The maximum number of
Receivers is eight.
