manualshive.com logo in svg

Xilinx LogiCORE IP, Руководство по эксплуатации продукта

Xilinx LogiCORE IP - это программное обеспечение для пользователей, которое предоставляет доступ к бесплатной загрузке инструкции пользователя. Получите свой руководство по использованию прямо сейчас с {сайта}. Управляйте и настраивайте свой продукт легко и удобно с помощью данного руководства.

Поделиться
Скачать
background image

XAUI v12.3 Product Guide

www.xilinx.com

142

PG053 April 6, 2016

Appendix D:

Additional Resources and Legal Notices

Please Read: Important Legal Notices

The information disclosed to you hereunder (the "Materials") is provided solely for the selection and use of Xilinx products. To the 

maximum extent permitted by applicable law: (1) Materials are made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS 

ALL WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF 

MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether 

in contract or tort, including negligence, or under any other theory of liability) for any loss or damage of any kind or nature related 

to, arising under, or in connection with, the Materials (including your use of the Materials), including for any direct, indirect, special, 

incidental, or consequential loss or damage (including loss of data, profits, goodwill, or any type of loss or damage suffered as a 

result of any action brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx had been advised 

of the possibility of the same. Xilinx assumes no obligation to correct any errors contained in the Materials or to notify you of 

updates to the Materials or to product specifications. You may not reproduce, modify, distribute, or publicly display the Materials 

without prior written consent. Certain products are subject to the terms and conditions of Xilinx's limited warranty, please refer to 

Xilinx's Terms of Sale which can be viewed at 

http://www.xilinx.com/legal.htm#tos

; IP cores may be subject to warranty and support 

terms contained in a license issued to you by Xilinx. Xilinx products are not designed or intended to be fail-safe or for use in any 

application requiring fail-safe performance; you assume sole risk and liability for use of Xilinx products in such critical applications, 

please refer to Xilinx's Terms of Sale which can be viewed at 

http://www.xilinx.com/legal.htm#tos

.

© Copyright 2012–2016 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated 

brands included herein are trademarks of Xilinx in the United States and other countries. The PowerPC name and logo are 

registered trademarks of IBM Corp. and used under license. All other trademarks are the property of their respective owners.

06/04/2014

12.1

• Added User Parameters to Design Flow Steps chapter.
• Added Device Migration to Migrating and Upgrading appendix.

04/02/2014

12.1

• Replaced “Kintex UltraScale” with UltraScale “architecture”.
• Added example xdc for placement of GTHE3 transceivers in UltraScale 

architecture.

12/18/2013

12.1

• Added UltraScale™ architecture support.
• Updated  resource  tables for all devices.
• Updated Transceiver Control and Status Ports table for 7 Series FPGAs.
• Added Transceiver Control and Status Ports table for Kintex® UltraScale™ 

devices.

• Added clocking example deign information for Kintex UltraScale devices.

10/02/2013

12.0

• Revision number advanced to 12.0 to align with core version number.
• Updated clocking scheme.
• Added transceiver control and status port support. Updated Table 2-7.
• Added “Upgrading in the Vivado Design Suite” section to Appendix B, 

Migrating and Upgrading

• Updated screen captures in Chapter 7.

03/20/2013

2.0

• Updated for core version 11.0 and Vivado Design Suite release.
• Removed all ISE, Virtex®-6, Virtex-5, Virtex-4, and Spartan®-6 material.
• Updated Debug appendix.
• Added core top level changes to include transceivers and supporting logic.
• Added hierarchical XDC support.
• Added Artix®-7 FPGA 20G support.

07/25/2012

1.0

Initial Xilinx release. This new product guide is based on ds266 and ug150.

Date

Version

Revision

Send Feedback

Содержание LogiCORE IP















































































































































Отзывы:

Нет отзывов

Похожие инструкции для LogiCORE IP

Vacon 20 Quick Manual preview
20
Бренд: Vacon Страницы: 62
Badger Basket 9960 Assembly Instructions preview
9960
Бренд: Badger Basket Страницы: 3
BADLANDS LE-03 Quick Manual preview
LE-03
Бренд: BADLANDS Страницы: 2
Cansec H1000 Installation Manual And Instructions For Use preview
H1000
Бренд: Cansec Страницы: 45
Cansec CP40 Installation Manual preview
CP40
Бренд: Cansec Страницы: 43
Cansec MAP2 Installation Manual preview
MAP2
Бренд: Cansec Страницы: 32
rada 566 Installation And Maintenance Manual preview
566
Бренд: rada Страницы: 16
FATEK FBs-1HLC Operation Manuals preview
FBs-1HLC
Бренд: FATEK Страницы: 10
Kathrein CAP Converter Operating Instructions Manual preview
CAP Converter
Бренд: Kathrein Страницы: 16
Zamel P-257/2 Quick Manual preview
P-257/2
Бренд: Zamel Страницы: 2
Zamel P-257/2 Quick Start Manual preview
P-257/2
Бренд: Zamel Страницы: 2
Zamel P-257/2 Manual Instruction preview
P-257/2
Бренд: Zamel Страницы: 2
OEM BCM94319SDB Installation Manual preview
BCM94319SDB
Бренд: OEM Страницы: 8
ABB ACH580-04 Quick Installation Manual preview
ACH580-04
Бренд: ABB Страницы: 102
Vag CEREX 300-L Operation & Maintenance Instructions Manual preview
CEREX 300-L
Бренд: Vag Страницы: 15
DigiPower IPP-S Series Installation Manual preview
IPP-S Series
Бренд: DigiPower Страницы: 27
IBA MS8xICP Manual preview
MS8xICP
Бренд: IBA Страницы: 29
FUTABA FP-4NBF Instruction Manual preview
FP-4NBF
Бренд: FUTABA Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды