Activity
Indicator
(Green)
Fault Indicator
(Red/Blue)
Description
Blinking at 4 Hz
Off
Data is being read from or written to
the NVMe drive.
Steady on/
blinking
Blinking blue at 4
Hz
The NVMe drive is being located.
Off
Blinking red at
0.5 Hz
The NVMe drive has completed the
hot swap process and is removable.
Off
Blinking red at 2
Hz
The NVMe drive is being hot-
swapped.
Steady on/Off
Red steady on
The NVMe drive is faulty.
E1.S Drive Indicators
Figure 5-42
E1.S drive indicators
●
If the VMD function is enabled and the latest VMD driver is installed, the E1.S
drive supports surprise hot swap.
Table 5-18
E1.S drive indicator description (VMD function enabled)
Activity
Indicator
(Green)
Fault Indicator
(Yellow)
Description
Off
Off
The E1.S drive is not detected.
Steady on
Off
The E1.S drive is detected and
operating properly.
Blinking at 2 Hz
Off
Data is being read from or written to
the E1.S drive.
Off
Blinking at 2 Hz
The E1.S drive is being located.
FusionServer 5288 V7 Server
Technical White Paper
5 Hardware Description
Issue 01 (2023-07-20)
Copyright © xFusion Digital Technologies Co., Ltd.
81