Configuratio
n
Front Drive
Rear Drive
Built-in Drive
Drive
Management
Mode
support
only
SAS/
SATA
drives.
● E1.S drive:
CPU pass-
through
● a: The I/O module (2 x 2.5") is configured with the module with 2 x 2.5" rear
drives and one PCIe riser card.
● b: Four NVMe drives are supported when CPU 2 is configured. A single-CPU
server does not support NVMe drives.
● For details about the optional components, consult the local sales
representative or see "OS and Parts Compatibility" in the
.
Drive Numbering
NO TICE
The drive numbers identified by the RAID controller card vary depending on the
cabling of the RAID controller card. This section uses the drive numbers identified by
a RAID controller card that adopts the default cabling described in "Internal Cabling"
in the
FusionServer 5288 V7 Server Maintenance and Service Guide
.
●
Drive numbering of the dual-RAID configuration 1 in
FusionServer 5288 V7 Server
Technical White Paper
5 Hardware Description
Issue 01 (2023-07-20)
Copyright © xFusion Digital Technologies Co., Ltd.
61