Xflighttech AUTOPILOT / TRIM Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 44

background image

Copyright © 2019 Xflight Technologies LLC, Florida, USA

44

EXCHANGE OF GOODS

The following provisions relate to the physical exchange of Goods and payment forming the

transaction of this agreement.

17.

TITLE/RISK OF LOSS.

Title to and risk of loss of goods shall pass to the buyer upon

delivery F.O.B. at the seller's place of home or business to an agent of the buyer
including a common carrier, notwithstanding any prepayment or allowance of freight by
the seller.

18.

INSPECTION.

Buyer, upon receiving possession of Goods, shall have a reasonable

opportunity to inspect the Goods to determine if the Goods conform to the
requirements of this Contract. If Buyer, in good faith, determines that all or a portion of
the Goods are non-conforming, Buyer may return the Goods to Seller at Buyer's
expense. Buyer agrees to securely mail the goods back to buyer with electronic tracking
to the address listed above.

19.

PAYMENT.

Payment due shall be made to Xflight Technologies LLC by cash, bank

transfer, credit card or PayPal prior to shipment of Goods. If an invoice is not paid when
due, seller will not ship Goods to Buyer. In addition to any other right or remedy
provided by law, if Buyer fails to pay for the Goods when due or reverses credit card
charges after shipment of Goods, Seller has the option to treat such failure to pay as a
material breach of this Contract, and may cancel this Contract and/or seek legal
remedies.

20.

PAYMENT OF TAXES.

Buyer agrees to pay all taxes of every description, country, federal,

state, and municipal, that arise as a result of this sale, excluding income taxes.

«
...
42
43
44

Содержание AUTOPILOT / TRIM













































Отзывы:

Нет отзывов

Похожие инструкции для AUTOPILOT / TRIM

Бренд: salmson Страницы: 16

Бренд: O-SO Pure Страницы: 16

Бренд: AmeriWater Страницы: 67

Бренд: Guardian Audio Страницы: 4

PWS BEV-300 Series

Бренд: Pure Water Страницы: 35

Quad-MC EV9628-28

Бренд: Everpure Страницы: 2

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 20

Бренд: Panasonic Страницы: 18

Бренд: Panasonic Страницы: 21

Бренд: Panasonic Страницы: 16

Бренд: Panasonic Страницы: 20

Бренд: Panasonic Страницы: 20

Бренд: Panasonic Страницы: 24

Бренд: Panasonic Страницы: 36

Бренд: Panasonic Страницы: 65

Бренд: Panasonic Страницы: 74

Бренд: Panasonic Страницы: 79

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды