Xerox XNIC-T'RING, Руководство по настройке, Страница: 57 / 244

U s i n g P C o n s o l e
C h a p t e r 3 : U s i n g t h e P r i n t e r w i t h N o v e l l N e t W a r e
❖
3-35
Adding the Printer
5
Enter the desired context name or press
<Insert>
to
browse for available contexts.
The context name defines the location of the print
queue in the NDS tree.
6
Select Print Queues from the Available Options menu.
7
Press
<Insert>
to create a new print queue.
8
Enter the printer queue volume name, or
Press
<Insert>
to view a list of volumes.
This is the name of the file server’s volume where the
print queue will be created.
9
Select the volume name.
10
Press
< E s c >
until the Available Options menu is
redisplayed.
1
Select Printers from the Available Options menu.
2
Press
<Insert>
.
3
Enter the XNIC printer name as:
X N E
x x x x x x _ 1
(for XNIC-E’NET)
or as:
X N T x x x x x x _ 1
(for XNIC-T’RING)
where xxxxxx represents the last six characters of the XNIC
hardware address. For example, a valid name would be:
X N E 1 0 7 6 E 3 _ 1
or
X N T 8 8 E 8 2 9 _ 1
If the printer name has been changed using the DS/P
utility, print a Printer Configuration Sheet to verify the
printer’s name. The printer’s name is the print server’s
name followed by “_1”.
4
Press
<Esc>
to redisplay the Available Options menu
.
ETR-CH03 Page 35 Wednesday, October 23, 1996 6:46 PM