I n s t a l l i n g X e r o x D o c u P r i n t 4 5 1 7 F i l e s f r o m a L o c a l C D - R O M D e v i c e
A p p e n d i x B : I n s t a l l a t i o n o n S u n P l a t f o r m s
❖
B-25
Once the network and PostScript driver files are stored and
extracted on the hard disk of your local workstation, use these
files, as needed, to add or delete network printers and respective
drivers.
2
When asked to enter install directory, enter the name of the
directory where you want the driver software to be installed.
Do not use the current directory for this purpose. Create
a new directory other than the current directory.
For example: # /home/xerox/driver_software.
3
When asked to run the xpconfig program to configure the
printers, you can change to the bin directory or run it with
the full path name.
For example:
# /home/xerox/driver_software/bin/xpconfig
(your directory path might
be different)
ETR-APPB Page 25 Thursday, October 24, 1996 7:51 AM