SNMP Configuration
To exit the SNMP Selection Menu, which returns you to the Port Settings Menu, press the rectangular
Close
button in the upper right corner of the touch screen.
Exiting the Port Settings Menu and returning to the Printer's Main Menu
1.
To exit the Port Settings Menu, returning to the Printer's Main screen, press the rectangular
Close
button in the upper right corner of the Port Settings Menu screen.
2.
Press the rectangular
Close
button in the upper right corner of the Ports and Protocols selection (two-
button) screen.
3.
Press the rectangular
Close
button in the upper right corner of the five-button screen containing the
Network Settings button.
4.
Finally, press the rectangular
Exit
button in the upper right corner of the four-button, System Settings
screen.
Note: If you changed any settings in the Port Settings menu, the Printer will automatically reboot to register
and enable your new settings.
Configuring SNMP Community Names with Internet Services
1.
Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field.
Press
Enter
.
2.
Click the
Properties
button or Tab.
3.
Click the plus symbol (+) to the left of the
Protocol Settings
file folder.
4.
Select
SNMP
in the directory tree.
5.
Enter a name for the
Community Name (Read-Only)
. This is the password for SNMP GET requests
from the SNMP Manager to the Agent in the Printer.
6.
Enter a name for the
Community Name (Read-Write)
. This is the password for SNMP SET requests
from the SNMP Manager to the Agent in the Printer.
Caution
: If you change the GET and/or SET Community Names, you must also change the names in all
network applications that are communicating by SNMP with this Printer.
7.
Enter a name for the
Community Name (Trap Notification)
. This is the default password for SNMP
TRAPS sent from the device to the Manager by SNMP.
8.
Optionally enter the System Administrator's name for packet identification purposes.
9.
Click the
Apply New Settings
button to accept the changes, or the
Restore Settings
button to return
the settings to their previous values.
Note: Changes to settings will not be applied until you restart the Printer.
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/A8_SNMP.htm (2 of 2) [9/4/03 8:32:31 AM]
Содержание WorkCentre M24 Color
