NetBIOS over IP Troubleshooting
NetBIOS over IP Troubleshooting
T3
Use the following check list to troubleshoot your network communication problem.
Check Physical Media and Network Interface Cards
1.
Verify that the Printer is powered ON.
2.
Verify that the Printer and Workstation are using the correct cabling to communicate over the network.
Use category 3 UTP patch (NOT crossover) cable for 10 Base T communications, category 5 UTP
patch (NOT crossover) cable for 10 Base T / 100 Base TX communications, and Token Ring cabling for
Token Ring networks.
3.
Verify that the cable at both the Printer and Workstation is fully plugged into the Network Interface Card
(NIC). Check the link light, which is typically a green LED, to make sure that it is lit. Typically, but not
always, a second light on the Network Interface Card will be intermittently flashing, indicating the
presence of network traffic. If neither of these lights is lit, there is a problem with the NIC.
Print a Settings List at the Printer and perform these tasks:
1.
On the Settings List, verify that
"SMB" is enabled
. If it is NOT enabled, to enable SMB, follow the
instructions supplied in the
Microsoft (NetBIOS over IP)
procedure in the NOS Selection section of this
guide.
2.
On the Settings List, note that the default name of the Printer's workgroup is
Workgroup
and that the
Printer has a unique (
SMB Host
) name. To modify the Printer's Workgroup or SMB Host names, if
required, use your workstation's Web browser to access the Internet Services (Web Pages) residing in
the Printer as described in the
Configure SMB
procedure in the Internet Services section of this guide.
3.
On the Settings List, under the
TCP/IP
data label, note what method the Printer is using to acquire its
TCP/IP addresses. If the method shown is
Static
, make sure that the Printer has a valid IP address,
Subnet Mask, and Gateway address for the network.
4.
On the Settings List, verify that
DNS (or WINS
, if using only a Windows NT network)
is enabled
. The
use of Naming Servers is REQUIRED to resolve NetBIOS device names to IP addresses for packet
routing over the TCP/IP network. If in doubt as to whether DNS and WINS are enabled, verify the
settings following the instructions supplied in the
TCP/IP Dynamic Addressing
procedure in the
NOS
Selection
section of this guide. WARNING: If the Printer is NOT informed of the addresses of the
DNS/WINS Servers, you may not be able to see or use the Printer's NetBIOS name on the network.
Make sure that the Printer is informed of the addresses of the DNS/WINS Servers, using the
instructions supplied in the
Configure TCP/IP Settings
procedure in the
Internet Services
section of
this guide.
5.
Under the
Internet Services
data label, verify that this feature is Enabled. If it is NOT, enable it
following the instructions supplied under the
Network Connectivity Tab
of this guide. You MUST use
this tool at your workstation if you need to change the Printer's Workgroup name, the SMB Host Name,
the TCP/IP (internet) Host Name, or DNS settings. Note that when using DNS to resolve host names to
IP addresses, the NetBIOS name (SMB Host) and the TCP/IP Host Name MUST be the same.
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/Pages/T3_NBTtrouble.htm (1 of 4) [9/4/03 8:33:21 AM]
Содержание WorkCentre M24 Color
