Xerox WorkCentre M24 Color, Руководство системного администратора

Страница: 50 / 228

5b1 - TCP/IP Dynamic Addressing
Step 5 ...continued
TCP/IP Dynamic Addressing
1.
Open your Web browser and enter the TCP/IP address of the Printer in the Address or Location field.
Press
Enter .
2.
Click the Properties button or Tab.
3.
Click the plus symbol (+) to the left of the Protocol Settings file folder.
4.
Select TCP/IP in the directory tree.
5.
Review the available selections as displayed on your screen and explained in the TCP/IP
Configuration Selection List , below.
6.
Accept the default Host Name, or type in your own unique Host Name for this Printer.
7.
Select DHCP or BOOTP as your method for obtaining an IP Address.
CAUTION: Changing the IP address for the Printer will affect NetBIOS/IP, LPR/LPD, FTP, SNMP, and
Port 9100 printing. It will also interrupt the ability to communicate with the printer using the Internet
Services (series of web pages on the Printer). When you change the Printer's IP Address, make sure to
print out a
Settings List (as stated in this guide) so that you have a record of the TCP/IP addresses for
use with workstations that need to communicate with the Printer using TCP/IP.
DHCP TIP: When using DHCP, set a reasonably long Lease Time for the IP Address so that the Printer
can be restarted, as required when changing operating parameters, without being continuously
assigned a new IP Address.
8.
Determine the method to use to supply the DNS Server IP Addresses (to resolve Host Names with IP
Addresses).
9.
Determine whether or not Dynamic DNS should be enabled.
10.
Determine the method to use to supply the SMTP Server IP Address.
11.
Determine the method to use to supply the WINS Server IP Address (to resolve Host Names with IP
Addresses exclusively in an NT environment).
TCP/IP Configuration Selection List
As displayed on your screen, the following selections are available for TCP/IP Configuration. Click jumps are
provided to each selection.
Under the TCP/IP Subject Label
Under the DNS Subject Label
Under the SMTP Subject Label
Under the WINS Server Subject Label
Under the IP Address List Subject Label
Under the TCP/IP Subject Label
Host Name. The default entry assures a name that is unique to this device on the network.
Get IP Address. Use this drop-down menu to select the method to use to assign IP Addresses. Select
Manual, DHCP, RARP, or BOOTP.
file:///C|/0-web/boxster/WorkCentreM24-System-Analyst-Guide/main/Install_5b1.htm (1 of 3) [9/4/03 8:32:39 AM]