Xerox WorkCentre 3315DN, Руководство пользователя

Страница: 170 / 262

System Setup
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide 170
System Setup
System Setup options enable you to customize settings which are specific to the machine, such as Date
& Time and Power Save.
Machine Settings
1. Press Machine Status on the control panel .
2. Press the up/down arrows to highlight System Setup and press OK . If necessary, enter the
Administrator’s Password using the keypad. Refer to Accessing the Setup Options on page 154 for
instructions.
3. Press the up/down arrows to highlight Machine Settings and press OK .
The following Machine Settings options and settings are available:
Note: * indicates the factory default setting.
Option Description Settings
Machine ID Use this option to enter a name
for your machine. • ID
Machine Fax No. Use this option to enter the fax
number for your machine. • Fax:
Date & Time When you set the time and date,
they are used in delay fax and
delay print options, and printed
on reports.
Note: If the machine’s power is
cut off, you need to reset the
correct time and date once the
power has been restored.
• 00-00-0000 [MDY]
• 00:00 AM
Clock Mode You can set your machine to
display the current time using
either a 12-hour or 24-hour
format. • 12 Hours *
• 24 Hours
Language Use this option to set the
message display language. • English *
• List of Available Languages
Default Mode Your machine is preset to Copy
mode. You can switch this
default mode between
Fax mode
and Copy mode.
• Copy *
• Scan
• E-mail
• Fax
Metric Defaults Use to set the machine to
display measurements in
millimeters or inches. • inches *
• mm