Connecting to a Wi-Fi Network at the Control Panel
To connect to a Wi-Fi network at the control panel:
1. At the printer control panel, press the
Home
button.
2. Log in as administrator. For details, refer to the
System Administrator Guide
at
3. Touch
Device > Connectivity > Wi-Fi
.
4. To enable the Wi-Fi feature, touch the enable toggle button.
5. To connect automatically to an existing Wi-Fi network:
a.
In the list of available Wi-Fi networks, touch the required network.
If the required Wi-Fi network is not listed, or if the required network uses WPS, configure the
connection manually. For details, go to the next step.
b.
If needed, to log in to the network, type the password.
c.
To select a Wi-Fi frequency band, touch
Wi-Fi Band
, then select an option.
By default, the Wi-Fi frequency band is set to AUTO.
d.
Touch
OK
.
6. To connect manually to a Wi-Fi Network:
a.
Touch
Manual Setup
.
b.
In the first field, type a name for the Wi-Fi network, then touch
Enter
.
c.
Touch
Network Type
, then select an option.
d.
Touch
Security
, then select an option.
e.
Touch
Wi-Fi Protected Setup (WPS)
, then select an option.
Note:
For a WPS setup with a Push Button Connection (PBC), select
PBC
.
f.
Touch
OK
.
Configuring the Primary Network at the Control Panel
You can set the primary network connection type at the device control panel.
• A Primary Network setup is required only if the optional Wi-Fi network connection kit is installed
and enabled.
• By default, without a Wi-Fi network connection, the primary network is set to Ethernet. When the
kit is installed and enabled, the device acquires two network connections. One network connection
is primary, and the other network connection is secondary.
69
