Cleaning the Document Feeder Rollers
Ensure that you clean the Document Feeder Rollers when you clean the scanner.
1. Lift the lever, then open the top cover of the document feeder.
2. With a clean, lint-free cloth moistened with water, wipe the feed rollers until they are clean.
3. Close the document feeder top cover.
Cleaning the Interior
Clean the interior of the printer regularly to prevent stains inside the printer that can deteriorate print
quality. Clean the printer interior whenever you replace a drum cartridge.
After clearing paper jams or replacing a toner cartridge, inspect inside the printer before closing the
printer covers and doors.
• Remove any remaining pieces of paper or debris. For details, refer to
.
• Remove any dust or stains with a clean, dry, lint-free cloth.
WARNING:
Never touch a caution-labeled area in the fuser. You can get burned. If a sheet of
paper is wrapped around the inside of the fuser, do not try to remove it immediately. Power off
the printer immediately and wait 40 minutes for the fuser to cool. Try to remove the paper jam
after the printer has cooled. If the error persists, contact your Xerox representative.
Cleaning the Printhead Lenses
The printer is constructed with four printhead lenses. The printhead lenses require regular cleaning to
maintain print quality. Clean the printhead lens every time the associated drum cartridge is replaced,
or if print quality starts to degrade.
Caution:
Do not perform this procedure when the printer is copying or printing.
190
