Phaser® 7300 Color Printer
Copyright © 2002 Xerox Corporation. All Rights Reserved.
35
Novell NetWare 3.x/4.x/5.x Network
This section provides installation and troubleshooting steps for Novell NetWare (3.x/4.x/5.x):
NetWare 3.x/4.x/5.x print server setup — see page 36.
Setup with CentreWare DP — see page 36.
Novell NetWare troubleshooting — see page 37.
Configuration software for NetWare networks
For Windows environments, the following software is available:
CentreWare DP - Use this application to configure the printer and the network when using
NetWare 3.x, 4.x and 5.x. Refer to the
Advanced Printer Management Tools CD-ROM
for the
CentreWare DP software and documentation.
Novell NWAdmin - Use this utility to manage existing queues on networks running NetWare 4.x
or 5.x in NDS or NDPS/NEPS mode.
The Configuration Pages report information that you need for NetWare configuration. On the
Configuration Pages, all zeros in the
IPX Networks
fields indicates that the printer does not recognize
the network connection; this probably indicates a faulty cable connection, an incorrect frame type, or
Reply to Get Nearest Server
has not been set to
On
. It must be set to
On
for at least one file server or
router on the same segment as the printer.
Note
For more information about the Xerox NDPS/NEPS solution, refer to the
CentreWare for
NDPS User Guide
on the
Advanced Printer Management Tools CD-ROM
or see the
Xerox web site at
www.xerox.com/officeprinting/support
Quick setup
1.
Print the Configuration Pages and retain them for reference. For information on printing
Configuration Pages, refer to the
Front Panel
section of the
Features Guide
on the
Interactive
Documentation CD-ROM
.
2.
Check the Configuration Pages and verify that
Novell enable=On
and
correct Frame Type
is set.
3.
Install CentreWare DP from the
Advanced Printer Management Tools CD-ROM
on a
Windows-based workstation.
4.
Run the CentreWare DP application and choose
Setup Wizard
from the
Printer
menu. NetWare
3.x users should select the bindery server install and follow the Setup Wizard steps. NetWare 4.x
and 5.x users should select the NDS install and follow the Setup Wizard steps.
5.
Install print drivers from your printer’s
Printer Installer and Utilities CD-ROM
.
6.
Send a print job to the printer.
