Xerox Legacy 4590, Руководство пользователя

Страница: 99 / 188

Xerox 4590 EPS/4110 EPS User Guide
6-13
6. Problem Solving
The printed result is not what was expected
This section describes solutions for situations in which the print
result is different from that expected.
No stapling done
Cause
The number of pages to staple exceeds 100 sheets.
No Action
Staple-enabled number of pages is 100 or lower with
the staple cartridge for 100 sheets. For Z-folding,
staple-enabled number of pages is 10 or 5 sheets
depending on the size of the paper used. For
booklet, up to 15 sheets can be stapled at one
time. Reduce the number of printed pages,
depending on the staple cartridge used.
No folding
Cause
The folder is not attached.
No Action
Check the options attached with this printer, and
reset the printer configuration.
Printing performed with
a different paper size
Cause
Paper size provided is different from the specified
tray size.
No Action
Change the paper size set in the tray, or change print
options to specify a tray that contains the appropriate
size.
The image is cut off on
the edge of the paper
Cause
Image exceeds the printable area of the machine.
No Action
Increase the printable area of the machine, or
decrease the document print area.
The printed font differs
from the font specified
on the computer
Cause
Font replacement is configured on the DocuSP print
driver.
No Action
Check the font replacement table.
Cause
Non-standard fonts are used for printing.
Action
Check the application or print driver settings.
If PostScript is being used, download the required
fonts.
Printing is slow
Cause
The print mode specifies Print Quality.
No Action
When printing image data that has image quality as a
priority, such as pictures, the print speed decreases.
Turn off the quality priority in the print mode.