Xerox Legacy 4590, Руководство пользователя

Страница: 108 / 188

Xerox 4590 EPS/4110 EPS User Guide 6-22
6. Problem Solving
116-703 P
Cause
An error occurred during PostScript processing.
Remedy
Either confirm the print data or click Spool Settings on
the
Details
tab in the print driver to set bi-directional
communications to off.
116-710 P
Cause
A probable cause is that the correct document size could
not be judged as the receive data exceeded the HP-GL/2
spool size.
Remedy
Increase the size assigned to HP-GL/2 auto-layout
memory.
116-713 O
Cause
Job was divided and printed due to insufficient disk
space.
Remedy
Remove unnecessary data from the hard disk to
increase free disk space.
116-714 P
Cause
An HP-GL/2 command error occurred.
Remedy
Check the print data.
116-720 P
Cause
An error occurred during printing as there was
insufficient memory.
Remedy
Stop unnecessary ports and remove unnecessary data
from the hard disk to increase free disk space.
116-740 P
Cause
Numerical value operation error occurred as a value
exceeding the value limit of the printer was used in the
print data.
Remedy
Check the print data.
116-747 P
Cause
There are too many paper margin values for the
HP-GL/2 effective coordinate area.
Remedy
Reduce the paper margin values, and instruct it to print
again.
116-748 P
Cause
There is no plot data in the HP-GL/2 print data.
Remedy
Check the print data.
116-749 P
Cause
Job cancelled because the specified font was
unavailable.
Remedy
Install the font or set up a font replacement on the print
driver side.
116-771
116-772
116-773
116-774
116-775
116-776
116-777
116-778
116-790
P
Cause
There was a problem with parameters in the JBIG data.
They were automatically edited.
Remedy
If any problem occurs in job result, try to process the job
again.
123-400 P
Cause
A malfunction occurred in the machine.
Remedy
Power-cycle the machine. If the machine error is not
fixed by performing the relevant remedy, contact the
Customer Support Center.
Error Code
Category
Cause and Remedy
Print/Other