Xerox Legacy 4590, Руководство пользователя

Страница: 103 / 188

Xerox 4590 EPS/4110 EPS User Guide
6-17
6. Problem Solving
012-400 O
Cause
Staple Waste Container Near Full.
Remedy
Follow the procedures to remove and replace the staple
waste container in the finisher.
012-949 O
Cause
Finisher Punch Scrap Container is not attached.
Remedy
Check that the punch scrape container is installed in the
finisher and inserted correctly.
016-210
016-211
016-212
016-213
016-214
016-215
O
Cause
An error occurred in the software settings.
Remedy
Power-cycle the printer. Contact the Customer Support
Center.
016-701 P
Cause
PCL print data could not be processed as there was
insufficient memory.
Remedy
Reduce resolution, cancel 2 Sided printing or N up, and
try to print again.
Refer to the online help for the print driver.
016-702 P
Cause
PCL print data could not be processed as there was
insufficient print page buffer.
Remedy
Take one of the following actions:
z
Set Print Mode to Speed Priority.
z
Use Ensure Print.
z
Increase the size of the print page buffer.
z
Add on memory.
For information about print modes and print guarantees, refer to the
online help for the print driver.
016-708 O
Cause
Annotation is not possible due to insufficient hard disk
space.
Remedy
Remove unnecessary data from the hard disk to
increase free disk space.
016-709 P
Cause
An error occurred during PCL processing.
Remedy
Retry printing.
016-721 P, O
Cause
An error occurred during print processing. Probable
cause is:
Printing was instructed by
Automatic Tray Selection
when
Paper Type Priority
is set to
Automatic Tray
switching Off
for all paper in the
Common Settings
.
Remedy
When printing by Automatic Tray Selection, set one of the
paper types to a setting other than
Automatic Tray switching Off
in
Paper Type Priority
.
Refer to “Paper Type Priority” in the System Administration Guide.
016-722 P
Cause
Unsupported staple position is specified.
Remedy
Confirm the position, and specify the print data again.
016-723 P
Cause
Unsupported punch position is specified.
Remedy
Confirm the position, and specify the print data again.
Error Code
Category
Cause and Remedy
Print/Other