Probable Causes
Solutions
The Date and Time Setup is set to Manual (NTP
Disabled).
To change the Date and Time to Automatic, enable
NTP in Xerox
®
CentreWare
®
Internet Services.
The time zone, date, or time is set incorrectly.
Set the time zone, date, and time manually.
SSccaannnneerr EErrrroorrss
Probable Causes
Solutions
Scanner is not communicating.
Power off the kiosk, and check the scanner cable.
Wait two minutes and power on the kiosk again.
If the problem is not resolved, contact your Xerox
®
service representative.
82
Xerox
®
Instant Print Kiosk
User Guide