Powering On and Off the Kiosk
The kiosk has two power switches.
Note:
Powering on and off the kiosk does not affect the user interface touch screen. The touch
screen is powered on and off separately using a plunger switch. For details, refer to
or
Powering Off the User Interface
.
• The main power switch controls the main power to the kiosk. The main power switch is located
behind the front cover.
Note:
For kiosks configured with a front door, to access the front cover, open the front
door.
• The secondary power switch controls power to the kiosk electronic components, and when
powered off, initiates a software-controlled shutdown. The secondary power switch is located
behind a clear plastic door in area F. Area F is located above the front cover.
The preferred method to power on and power off the kiosk is to use the secondary power switch.
Caution:
• To prevent a kiosk malfunction or damage to the internal hard drive:
–
Power off the secondary power switch.
–
Power off the user interface. For details, refer to
Powering Off the User Interface
.
–
After the screen goes dark, wait 10 seconds, then power off the main power switch.
• Do not plug in or unplug the power cords while the power switch is in the On position.
26
Xerox
®
Instant Print Kiosk
User Guide