Basic Regulations
Xerox has tested this kiosk to electromagnetic emission and immunity standards. These standards are
designed to mitigate interference caused or received by this kiosk in a typical office environment.
U
Unniitteedd SSttaatteess FFC
CC
C RReegguullaattiioonnss
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy. If it is not installed and used in
accordance with these instructions, it can cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his/her own expense.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not approved by Xerox
®
can void the authority of the
user to operate this equipment.
Note:
To ensure compliance with Part 15 of the FCC rules, use shielded interface cables.
EEnnvviirroonnm
meennttaall B
Beenneeffiittss ooff D
Duupplleexx PPrriinnttiinngg
Most Xerox
®
products have duplex printing, also known as 2-sided printing, capability. This enables
you to print on both sides of the paper automatically, and therefore helps to reduce the use of
valuable resources by reducing your paper consumption. Using the duplex function will reduce the
environmental impact of your work.
PPaappeerr TTyyppeess
This product can be used to print on both recycled and new paper, approved to an environmental
stewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight
paper (60 g/m²), which contains less raw material and thus save resources per print, can be used in
certain applications. We encourage you to check if this is suitable for your printing needs.
PPoow
weerr C
Coonnssuum
mppttiioonn aanndd A
Accttiivvaattiioonn TTiim
mee
The amount of electricity that a device consumes depends on the way the device is used. This device
is designed and configured to enable you to reduce your electricity usage.
Power Saver modes are enabled on your device to reduce energy consumption. After the last print,
the device transitions to Ready mode. In this mode, the device can print again immediately. If the
Xerox
®
Instant Print Kiosk
User Guide
123
