SSccrreeeenn iiss B
Bllaannkk
Probable Causes
Solutions
The power cords are not plugged correctly into the
outlets.
Power off the kiosk, then plug the power cords
securely into the outlets.
Something is wrong with the outlet connected to the
kiosk.
• Plug another electrical appliance into the outlet,
then check if the appliance operates properly.
• Try a different outlet.
One of the power switches is not powered on.
Power off both the kiosk power switches. For details,
refer to
Powering Off the User Interface
. Wait 2
minutes, then power on all 3 power switches. For
details, refer to
The kiosk is connected to an outlet with a voltage or
frequency that does not match the kiosk
specifications.
Use a power source with the correct voltage and
frequency for the device. For details, refer to
The Enablement box requires resetting.
Unplug, then plug in the power cord for the
Enablement box, located on the lower right side of
the device.
Caution:
Plug the three-wire cord (with grounding prong) directly into a grounded AC outlet
only. Do not use a power strip. If necessary, contact a licensed electrician to install a properly
grounded outlet.
TTrroouubblleesshhoooottiinngg U
Usseerr IInntteerrffaaccee EErrrroorr M
Meessssaaggeess
User Interface Error Message
Probable Causes
Solutions
The device requires attention.
Please ask for assistance.
The device requires administrator
intervention.
Contact the system administrator,
or refer to the
System
Administrator Guide
at
.
• The kiosk screen is unable to
connect to the device. Check to
be sure the device is powered
on. If the problem persists,
please ask for assistance.
• Device not able to detect local
connectivity. Please contact
your system administrator for
assistance.
The device is not powered on.
Power on the device. For details,
refer to
The USB cable that connects the
User Interface to the device is
disconnected.
Connect the USB cable from the
User Interface to the machine in
either of the 2 available ports.
The device requires restarting.
Restart the device. For details, refer
to
.
• Device not able to detect DNS
connectivity. Please contact
The Ethernet cable is
disconnected.
Connect the Ethernet cable. For
further support, contact your
Xerox
®
Instant Print Kiosk
User Guide
77