Xerox DP N24, Руководство системного администратора

Страница: 61 / 336

Offsetting Output
Chapter 2: Paper Handling
❖
2-23
Offsetting Output
The 500 Sheet Face-down Bin supports offsetting output between
successive jobs or multiple collated sets of a single job. Offsetting is
controlled from the Control Panel (see page 3-40) or via
CentreWare DP.
The following conditions must be met before offsetting occurs
between jobs:
• The offset function occurs only between successive jobs that are
both destined for the Face-down Bin.
For example, a print job may contain a banner sheet in PCL that
precedes a PostScript print job. If they are both directed to the
Face-down Bin, the banner sheet is offset from the PostScript
job. If the banner sheet is directed to the Face-up Bin (no offset
capability) and the PostScript job is directed to the Face-down
Bin, offset does not occur between the banner sheet and the
PostScript job. If, however, the next job is directed to the
Face-down Bin, offset will occur between the PostScript job and
the next job.
• The offset function occurs between successive jobs directed to
the Face-down Bin only if the jobs contain data that results in a
sheet being printed and delivered to the bin.
For example, if a PCL job contains <ESCAPE>E sequences at
the beginning of a job and there is no printable data separating
these commands, the offset does not occur (even though these
escape sequences are valid job boundaries).
The 200 Sheet Face-up Output Bin and the 10-bin Mailbox/Collator do
not support offsetting.