Xerox DP N24, Руководство системного администратора

Страница: 190 / 336

Control Panel Messages
6-16
❖
DP N24, N32 and N40 System Administrator Guide
M a i l b o x F a i l u r e
Power Off/On
The 10-bin Mailbox/Collator has failed. Printing to the 10-bin Mailbox/Collator
cannot continue. You can, however, send output to the standard output bin.
ACTION: Power OFF and ON the printer. If the problem persists, contact your
dealer or Olivetti.
M a i n t e n a n c e K i t
R e q u i r e d
The Fuser, Bias Transfer Roll (BTR) and feedrolls have reached their end of life.
ACTION: Install a new Maintenance Kit. See Appendix B: Maintaining the Printer
for instructions.
M a n u a l F e e d
< S i z e > < T y p e >
The paper required for the job needs to be loaded in the Manual Tray. The bottom
line contains the paper size (e.g., Letter (8.5x11), A3 (297x420), A4 (210x297) and
paper type (e.g., Plain, Preprinted, Letterhead, etc.).
ACTION: Add the requested paper size and paper type to the manual tray.
M C U F a i l u r e
Power Off/On
The printer control program has been destroyed.
ACTION: Power OFF and ON the printer. If the problem persists, contact your
dealer or Olivetti.
M e m o r y F a i l u r e
Power Off/On
The printer controller memory has failed; printing cannot resume.
ACTION: Perform a Memory Check by powering OFF the printer, then powering it
ON again. If the problem persists, contact your dealer or Olivetti.
M e n u L o c k e d A submenu has been locked and the user is prohibited from making any changes to
the configuration parameters in the sub-menu.
ACTION: The menu can only be unlocked with a PJL command or SNMP tool
such as CentreWare DP.
Table 6.2 Control Panel messages and corrective actions (continued)
Message Description/Corrective Action
Table 6.2 Page 12 of 19