Xerox DP N24, Руководство системного администратора

Страница: 170 / 336

Using the Hard Disk Drive for Secure and Proof Jobs
5-8
❖
DP N24, N32 and N40 System Administrator Guide
Using the Hard
Disk Drive for
Secure and Proof
Jobs
Secure, collate copy, and proof jobs that have been submitted to the
printer are stored in PCL or PostScript format on the Hard Disk
Drive. These secure and proof jobs can be printed (or deleted)
through the Password Menu where you enter the 4-digit password
for the job or jobs to be printed. Procedures for printing or deleting
secure jobs are listed in Table 3.6 on page 3-17.
The secure or proof job is placed at the top of the print queue, and
will print following completion of the currently printing job. If
more than one job is requested, jobs are placed on the print queue in
the order requested. Secure or proof jobs having the same priority
are printed on a first in, first out basis.
Creating Secure Jobs Secure printing delays printing of a job until a password associated
with the job is entered at the printer’s Control Panel. Entering the
password at the Control Panel will provide access to only those jobs
send with that password.
Secure jobs are normally created in PCL and PostScript by
choosing the feature in a driver. When not using a driver, secure
jobs may be created by preceding the job with the following PJL
commands:
@PJL XSECUREJOB
@PJL XJOBPASSWORD = "number"
These commands must be immediately followed by a standard PJL
“JOB” command that includes the “jobname.”