Xerox DP N24, Руководство системного администратора

Страница: 325 / 336

Environmental Specifications
Appendix G: Environmental Specifications
❖
G-3
Always follow all warnings and instructions marked on, or supplied
with, the equipment.
Always locate the equipment on a solid support surface with
adequate strength for the weight of the machine.
Always exercise care in moving or relocating the equipment.
Always place the equipment in an area which provides adequate
room area for ventilation and servicing.
Always use the materials and supplies specifically designed for
your Olivetti equipment. Use of unsuitable materials may result in
poor performance and, possibly, a hazardous situation.
Always use the GFI power cord; otherwise Olivetti does not
guarantee the successful operation of your machine.
Never use a ground adaptor plug to connect the equipment to a
power source receptacle that lacks a ground connection terminal.
Never attempt any maintenance function that is not specifically
described in this documentation.
Never obstruct ventilation openings. These are provided to prevent
overheating.
Never install the equipment near a radiator or any other heat source.
Never override or “cheat” electrical or mechanical interlock
devices.
Never push objects of any kind into the ventilation openings.
Never operate the equipment if you notice unusual noises or odors.
Disconnect the power cord from the power source receptacle and
contact your dealer or Olivetti to correct the problem.
If you need any additional safety information concerning the
equipment or materials, contact your dealer or Olivetti.
WARNING: Use of controls, adjustments, or performance of
procedures other than those specified herein may result in a
hazardous radiation exposure.
This product will produce less than 0.1 ppm ozone during normal
operation. The ozone produced is dependent on copy volume and is
heavier than air. Providing the proper environmental parameters as
specified by Olivetti will ensure that concentration levels meet safe
limits.