Xerox DP N24, Руководство системного администратора

Страница: 121 / 336

Ethernet Menu
Chapter 3: Using the Control Panel
❖
3-57
IP Address
Set the four byte IP address. The available
values are:
xxx.xxx.xxx.xxx
Where xxx = 000 to 255
.
This item only appears if IP Address Res.
is set to
Control Panel .
For this item (after Step 3), Item Up
moves the cursor to the right through the
displayed IP address and Item Down
moves the cursor to the left. This allows
you to change characters within the string
rather than having to reenter the entire
string.
With the cursor displayed under a
character, Value Up
increments the
value of that character and Value
Down
decrements the value.
1. Press Menu Up or Menu
Down until you see:
M e n u s
E t h e r n e t M e n u
2. Press Item Up or Item
Down until you see:
E t h e r n e t M e n u
I P A d d r e s s
3. Press Value Up or Value
Down . You will see:
I P A d d r e s s =
xxx.xxx.xxx.xxx
4. Press Value Up or Value
Down to change the value of
the character above the cursor. The
value is incremented or
decremented by 1 each time the
key is pressed. Holding down
Value Up
or Value Down
causes continuous scrolling
through the values.
I P A d d r e s s =
xxx.xxx.xxx.xxx
5. To change other characters in the
IP address, press Item Up or
Item Down to scroll right or
left respectively through the
character string, then press Value
Up
or Value Down to
change the value of the character
above the cursor (as in Step 4).
I P A d d r e s s =
xxx.xxx.xxx.xxx
6. When you have completed setting
the IP address, press Enter .
You will see:
E t h e r n e t M e n u
I P A d d r e s s
7. Press On Line . You will see: R e a d y
Table 3.13 Ethernet Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 3.13 Page 8 of 11