Xerox DocuPrint N24, Руководство системного администратора

Страница: 204 / 398

Control Panel Messages
6-12
❖
DocuPrint N24, N32, and N40 System Administrator Guide
D e l e t i n g . . .
The secure or proof job(s) you asked to delete is(are) being deleted.
ACTION: None.
Demo Mode
This Reset Menu selection allows you to enter the printer demonstration mode.
ACTION: Press
Value Up
or
Value Down
to toggle between
Yes
and No . Select Yes and press Enter to enter the demonstration
mode.
D i s k F a i l u r e
A general failure (such as read/write) of the hard disk has occurred.
ACTION: Power OFF and power ON the printer. If this message appears again
at power ON, contact your dealer or Xerox.
D i s k F u l l
A secure or proof job spooled to the disk exceeds the available free space on the
hard disk. The job will be canceled and deleted after part of the first copy is
printed.
ACTION: The job is cancelled and deleted after printing the first copy of the
partial job. Delete fonts, macros, or secure and proof jobs to make
space.
Duplex Unit Fail
P o w e r O f f / O n
The Duplex Module has failed. Printing from the Duplex Module cannot
continue.
ACTION: Power OFF the Printer. Remove and reinstall the Duplex Module
following the instruction in
Appendix C: Installing and Removing
Printer Options . Then Power ON the printer. If it still fails, contact
your dealer or Xerox.
E n t e r P a s s w o r d
_ x x x
This message appears when using the Password Menu. From this menu, the Job
Menu can be accessed in order to release jobs for printing.
ACTION: Enter a valid 4 digit password using the Control Panel keys.
E n v . F e e d e r E m p t y
The Envelope Feeder is no longer being used to print because it is empty.
ACTION: Refill the Envelope feeder if it is to be used again.
Table 6.2 Control Panel messages and corrective actions (continued)
Message Description/Corrective Action
Table 6.2 Page 8 of 21