Xerox DocuPrint N24, Руководство системного администратора

Страница: 160 / 398

Novell Menu
3-82
❖
DocuPrint N24, N32, and N40 System Administrator Guide
NDS Tree
Set the NDS Tree character string (from
0 to 63 characters in length). The
available values are:
Null
A - Z, 0 - 9, hyphen (-) and underscore (_)
For this item (after Step 3),
Item
Up moves the cursor to the right
through the displayed NDS Tree
character string and
Item Down
moves the cursor to the left. This allows
you to change characters within the
string rather than having to reenter the
entire string.
With the cursor displayed under a
character,
Value Up
increments
the value of that character and Value
Down
decrements the value.
From any cursor position, you
can null out (delete) to the end
of the string by selecting the
space character with
Value
Up or Value Down
and then pressing Enter .
1. Press Menu Up or Menu
Down
until you see:
M e n u s
N o v e l l M e n u
2. Press Item Up or Item
Down until you see:
N o v e l l M e n u
N D S T r e e
3. Press Value Up or Value
Down
. You will see:
N D S T r e e =
x xx...xxx
4. Press Value Up or Value
Down
to change the value
of the character above the
cursor. The value is incremented
or decremented by 1 each time
the key is pressed. Holding
down
Value Up or Value
Down
causes continuous
scrolling through the values.
N D S T r e e =
x xx...xxx
5. To change other characters in
the NDS Tree character string,
press
Item Up
or
Item
Down to scroll right or left
respectively through the
character string, then press
Value Up
or
Value
Down to change the value
of the character above the
cursor (as in Step 4).
N D S T r e e =
xxx...xxx
6. When you have completed
setting the NDS Tree, press
Enter . You will see:
N o v e l l M e n u
N D S T r e e
7. Press On Line . You will see:
R e a d y
Table 3.15 Novell Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 3.15 Page 5 of 6