Xerox DocuPrint N24, Руководство системного администратора, Страница: 200 / 398

Control Panel Messages
6-8
❖
DocuPrint N24, N32, and N40 System Administrator Guide
1 0 0 0
†
-IOT
† Appears in the upper left
corner of the display.
A fault condition has occurred.
ACTION: Power OFF and power ON the printer. If this code appears again at
power ON, contact your dealer or Xerox.
2 0 0 0
†
-XIE RAM
† Appears in the upper left
corner of the display.
A fault condition has occurred.
ACTION: Power OFF and power ON the printer. If this code appears again at
power ON, contact your dealer or Xerox.
4 0 0 0
†
-NIC
† Appears in the upper left
corner of the display.
A fault condition has occurred.
ACTION: Power OFF and power ON the printer. If this code appears again at
power ON, contact your dealer or Xerox.
A l l J o b s
D e l e t e
This message appears for secure printing. You can delete all secure jobs in your
queue.
ACTION: Press
Value Up
or
Value Down
to toggle between
Delete
and Print . Select Delete to delete all jobs and press Enter .
A l l J o b s
P r i n t
This message appears for secure printing. You can print all secure jobs in your
queue.
ACTION: Press Value Up or Value Down to toggle between Print
and
Delete
all jobs. Select
Print
to print all jobs and press
Enter .
Any Tray
<Size> <Type>
The job requires a specific type of paper which can be loaded into any tray. The
bottom line contains the paper size (e.g., Letter (8.5x11), A3 (297x420), A4
(210x297) and paper type (e.g., Plain, Preprinted, Letterhead, etc.). ACTION:
Add the requested paper size and paper type to any tray.
C a n c e l i n g J o b . . .
A job is being canceled.
ACTION: None.
Table 6.2 Control Panel messages and corrective actions (continued)
Message Description/Corrective Action
Table 6.2 Page 4 of 21