Xerox DocuPrint N24, Руководство системного администратора

Страница: 207 / 398

Control Panel Messages
Chapter 6: Troubleshooting
❖
6-15
I O T N V M F a i l
Power Off/On
Nonvolatile Memory (NVM) has failed on the print engine (also called the
IOT—Image Output Terminal). Printing cannot resume.
ACTION: Power OFF and ON the printer. If this message reappears, contact
your dealer or Xerox.
J o b n
This message appears after selecting a secure job to be printed or deleted. If the
job was given a name, that name appears in place of “
Job n
”.
ACTION: Print or delete the job (see the following two messages).
J o b n
D e l e t e
This message appears from the Password Menu. It causes a specific job to be
deleted. If the job was given a name, that name appears in place of “
Job n
”.
ACTION: Press Value Up or Value Down to toggle between Delete
and
Print
. Select
Delete
to delete the job and press
Enter
.
J o b n
P r i n t
This message appears from the Password Menu. It causes a specific job to be
printed. If the job was given a name, that name appears in place of “
Job n
”.
ACTION: Press Value Up or Value Down to toggle between Print
and Delete . Select Print to print the job and press Enter .
L a s e r F a i l u r e
Power Off/On
The laser assembly has failed and printing cannot continue.
ACTION: Power OFF and ON the printer. If this message reappears, contact
your dealer or Xerox.
Table 6.2 Control Panel messages and corrective actions (continued)
Message Description/Corrective Action
Table 6.2 Page 11 of 21