Xerox DocuPrint N24, Руководство системного администратора

Страница: 140 / 398

Ethernet Menu
3-62
❖
DocuPrint N24, N32, and N40 System Administrator Guide
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds (
30*
)
This item also causes an implicit job end
such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either
Value Up
or
Value Down
is pressed. Holding
down Value Up or Value
Down causes continuous scrolling
through the values.
1. Press Menu Up or Menu
Down
until you see:
M e n u s
E t h e r n e t M e n u
2. Press Item Up or Item
Down until you see:
E t h e r n e t M e n u
P o r t T i m e o u t
3. Press Value Up or Value
Down
until you see:
P o r t T i m e o u t =
New Value
4. Press Enter . You will see:
E t h e r n e t M e n u
P o r t T i m e o u t
5. Press On Line . You will see:
R e a d y
Speed
Set the speed of the 10/100 Ethernet
Card. The available values are:
Auto*
10 Mbit
100 Mbit
This item appears only if the 10/100
Ethernet Card is installed in the printer.
1. Press Menu Up or Menu
Down until you see:
M e n u s
E t h e r n e t M e n u
2. Press
Item Up
or
Item
Down until you see:
E t h e r n e t M e n u
S p e e d
3. Press
Value Up
or
Value
Down until you see:
S p e e d =
New Value
4. Press Enter . You will see:
E t h e r n e t M e n u
S p e e d
5. Press
On Line
. You will see:
R e a d y
Table 3.13 Ethernet Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 3.13 Page 11 of 11