Xerox DocuPrint N2025, Руководство по обслуживанию

Страница: 239 / 378

02/2000
6-7 DocuPrint N2025/N2825
GP 2.1
General Procedures / Information Initial Issue
4. Environmental Specifications
5. Life
Table 4 Environmental Specifications
Environmental condi-
tions for installation
(Printer unpacked and
having the Print Car-
tridge installed) Operating: 41 ~ 95
°
F (5 ~ 35
°
C)15 ~ 85% RH (Without condensa-
tion)0 ~ 3100 m above sea level Horizontal bias within 5
°
of level
Illumination under 3000 Lux. (Direct sunlight must be avoided)
Non-operating: -68 ~ 104
°
F (-20 ~ 40
°
C)5 ~ 85% RH (Without
condensation)0 ~ 3100 m above sea level
Environmental condi-
tions for storage of the
printer in the packed
condition When the Print Cartridge is packed together: • Normal conditions
(Assured period: 12 months)32 ~ 95
°
F (0 ~ 35
°
C)15 ~ 80% RH
(Without condensation)• Sever conditions (Assured period: 1
month)-68 ~ 32 or 95 ~ 104
°
F (-20 ~ 0 or 35 ~ 40
°
C)5 ~15 or 80 ~
95% RH (Without condensation) When the Print Cartridge is not
packed together: • Normal conditions (Assured period: 12 months)-
68 ~ 122
°
F (-20 ~ 50
°
C)5 ~ 85% RH (Without condensation)•
Sever conditions (Assured period: 48 hours)122 ~ 140
°
F (50 ~ 60
°
C)85 ~ 95% RH (Without condensation)† The assured altitude is 0
~ 3000 m above sea level. When transported by air in a cargo room
pressurized over 70.93 kPa, the assured altitude is 0 ~ 15000 m.
Environmental condi-
tions for storage of the
Print Cartridge in the
packed condition • Normal conditions (Assured period: 24 months)32 ~ 95
°
F (0 ~
35
°
C)15 ~ 80% RH (Without condensation)• Sever conditions
(Assured period: 1 month)-68 ~ 32 or 95 ~ 104
°
F (-20 ~ 0 or 35 ~
40
°
C)5 ~15 or 80 ~ 95% RH (Without condensation)† The assured
altitude is 0 ~ 3000 m above sea level. When transported by air in a
cargo room pressurized over 70.93 kPa, the assured altitude is 0 ~
15000 m. † The unpacked Print Cartridge remains intact for 12
months in the above non-operating environmental conditions for the
printer.
Noise generation
(excluding impulse
noises) Printing: 1 Deck 2 Deck 2000 Sheet
Feeder without the Duplex 49.5 dB
50.5 dB 53.0 dB with the Duplex Assembly 50.5 dB 50.5 dB
53.0 dB Standby: 35.0 dB Measured according to ISO 7779, print-
ing with the MBF Assembly closed. The printer has two optional
Paper Feeders installed, with the optional Duplex Assembly not
installed
Dust generation 0.1 mg/m3 or less† Measured by the FX Mass Measurement
method for an hour
Ozone generation 0.02 ppm or less in TWA (Time Weighted Average), measured
according to ECMA 129 Standard
Table 5 Life
Life of OCT Either 600,000 prints or 5 years
Life of Duplex Either 600,000 prints or 5 years which ever comes first
Life of printer engine Either 600,000 prints on Letter size paper (LEF) or 5 years which
comes earlier † A double-sided print is counted as two prints.
Life of Paper Feeder 600K for each-500 sheet & 2000 sheet feeders
Life of Print Cartridge 17,000 prints (average)† The life of the Print Cartridge is defined as
the number of prints which satisfy the specified print quality without
shaking the Print Cartridge when consecutively printing the FX test
pattern on A4 size sheets (LEF) under the normal conditions with
the obtained life converted into an estimated life for 5% image cov-
erage. A double-sided print is counted as two prints.
Table 5 Life