Security
ColorQube 9301/9302/9303 Multifunction Printer
69
System Administrator Guide
Connect your card reader to the USB port.
If you are using Xerox
®
Secure Access, install the Xerox
®
Secure Access authentication server
software and configure it with user accounts. Refer to the Xerox
®
Secure Access Unified ID System
documentation for help.
Note:
Accounts created on the Xerox
®
Secure Access server must match accounts stored in the printer
local database or in another network authentication server.
Setting Up Authentication for a Smart Card System
1.
In CentreWare Internet Services, click
Properties
>
Security
>
Authentication
.
2.
Click
Setup
.
3.
Click
Edit
.
4.
Under
Authentication method on the machine's touch interface
, select
Smart Cards
.
5.
You can configure an alternate authentication method to allow users to access the printer without a
smart card. Under
Alternate authentication method on the machine's touch interface
, select
User Name / Password Validated Remotely on the Network
.
6.
Specify a method for the printer to authenticate users who access CentreWare Internet Services
from their computer. Under
Authentication method on the machine's web user interface
, select
User Name / Password Validated Locally on the Xerox Machine
or
User Name / Password
Validated Remotely on the Network
.
7.
Under Authorization information is used, select
Locally on the Xerox Machine
, or
Remotely on the
Network
.
8.
Click
Save
.
9.
Type the Feature Enablement Key that is included in the Common Access Card Enablement Kit, and
click
Next
.
10.
Click
Next
again. A list of configuration settings appears at the bottom of the Xerox
®
Access Setup
page.
11.
Click
Edit
to configure any settings that are marked in red text as Required; Not Configured.
Configuring Domain Controller Settings