Network Configuration
26
ColorQube 9301/9302/9303 Multifunction Printer
System Administrator Guide
Configuring DNS/DDNS Settings at the Control Panel
Domain Name System (DNS) and Dynamic Domain Name System (DDNS) are systems that map host
names to IP addresses.
1.
At the printer control panel, press the
Machine Status
button, then touch the
Tools
tab.
2.
Touch
Network Settings
>
TCP/IP Settings
.
3.
Touch
DNS Configuration
.
Note:
If DHCP is enabled, your company DHCP server can provide the following information.
4.
Touch
Domain Name
, touch the field under Domain Name, type the domain name using the touch
screen keypad, then touch
Save
.
5.
Touch
DNS Servers
.
a.
Touch
Primary DNS Server
, then type the server address using the touch screen keypad.
b.
Touch
Alternate DNS Server #1
, then type the server address using the touch screen keypad.
c.
Touch
Alternate DNS Server #2
, then type the server address using the touch screen keypad.
d.
Touch
Save
, then touch
Close
to exit the DNS Servers screen.
6.
Touch
Dynamic DNS Registration
, and touch
Enable
under IPv4 or IPv6 if necessary.
Configuring IP Settings in CentreWare Internet Services
If your printer has a valid network address, you can configure TCP/IP settings in CentreWare Internet
Services.
Configuring IPv4
You can use IPv4 or IPv6 in addition to or in place of the other.
1.
In CentreWare Internet Services, click
Properties
>
Connectivity
>
Protocols
.
2.
Click
IP (Internet Protocol)
>
IPv4
.
3.
Under Protocol, select
Enabled
to enable the protocol.
CAUTION:
If both IPv4 and IPv6 are disabled, you cannot access CentreWare Internet Services. To
access IPv4 and IPv6 settings in CentreWare Internet Services, enable TCP/IP at the printer control
panel. If you disable TCP/IP or change the IP address, any dependent protocols are disabled and the
network controller restarts.
4.
Under IP Address Resolution select an option from the drop-down list. Depending on the option you
select, some or all of the fields can be disabled.
STATIC
: This option disables dynamic addressing and allows you to type a static IP address.
Type the Machine IP Address, Subnet Mask, and Gateway Address.
BOOTP
: This option allows your DHCP server to assign an IP address to the printer. Dynamic
DNS Registration is enabled.
DHCP
: This option allows your DHCP server to assign an IP address to the printer. Dynamic DNS
Registration is enabled.